- BUTT SPLICE DRIVER
- BUTT SPLICE VERIFICATION
- BUTT SPLICE FREE
Field cutting the light will void the warranty. Please review the considerations below to ensure a successful installation.
Multiple light lengths can be wired to one driver.
BUTT SPLICE DRIVER
Note: One driver (part #810-00719) will need to be used for every 5.5A of power used.
Wire the light based on the wiring diagram. If using mounting channels for installation, screws should be used every 12”. Remove the paper backing and firmly press the light in place. Clean the surface with a mixture of 50% water/50% isopropyl alcohol.įailure to follow the surface preparation guidelines will void the warranty. The silicone on the light is flexible and pushing away from the wired end will leave a gap at the end of the run. When pushing the light into the channel, make sure to push towards the wired end. The light should go into the channel pretty easily by just thumbing it in. Start at the wire lead end and beginning of the channel, and work the light into the channel going 6” at a time. Unroll the entire length of Reed (HTLL) before installing. If adhesion failure occurs, screw-in mounting channels may be used for installation.Ĭontact ITC sales for more information on mounting channels: 61 /. Rough surfaces may prevent proper adhesion. Failure to properly clean the surface may result in loss of adhesion. 
Surfaces should be cleaned and primed per the 3M specified cleaning instructions* on page two.
BUTT SPLICE FREE
Make sure surfaces are smooth, clean, and free of dust and debris before installing this product. Only bend the LED ribbon in one natural direction, do not try to bend in an unnatural direction such as twisting. Bending to a tight 90° angle could cause damage to the circuit. Do not bend lighting more than necessary. It is recommended that fuse protection be added to the positive (+) input. To avoid a hazard to children, account for all parts and destroy all packing materials. Disconnect power before installing, adding, or changing any component. BUTT SPLICE VERIFICATION
our company established an independent UL laboratory in 2015, which enables KF to obtain timely and effective data, and in turn, delivering satisfactory results in regards to both the technical verification in product development and the regular quality inspection of manufactured Vinyl-Insulated Butt Splice Connectors for sale. In this way, the reliability, safety, and appearance of our electrical connectors is greatly improved. Meanwhile, the advanced production and inspection equipment contribute to the standardized and efficient manufacturing processes KF.The imported automation equipment ensures that every process is consistent and perfect Vinyl-Insulated Butt Splice Connectors. is China Vinyl-Insulated Butt Splice Connectors Manufacturers and Vinyl-Insulated Butt Splice Connectors factory, we has continuously introduced automation equipment to improve its production processes. Modern industrial production, automation, and intellectualization can effectively guarantee our efficiency and quality. Vinyl-Insulated Butt Splice Connectors Manufacturers Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector) Butt connectors are made of pure copper with excellent electrical conductivity.
Heat Shrink-Insulated Quick Disconnectors. Nylon-Insulated Double Crimp Butt Splice Connectors. Heat Shrink-Insulated Butt Splice Connectors. Vinyl-Insulated Double Crimp (Easy Entry) Terminals. Vinyl-Insulated Single Crimp (Easy Entry) Terminals. Heat Shrink-Insulated Single Crimp Terminals.
0 kommentar(er)
